PlasticsPatents Home

Maropolymeronline.com

 

Foams ©

1 Notes ©

Patentpedia Index 

4/28/2016 through 5/21/2012

5 Patent Abstracts

163 Patent Titles

1 Topics

1 Subtopics

0 Notes

...............................................................................

1 Topics

Materials  (B)

...............................................................................

2 Subtopics

Foam Applications (D)

Injection Molding Foams (E)

...............................................................................

...............................................................................

1 Notes

...............................................................................

1. Introduction

A foam is a substance that is formed by trapping pockets of gas in a liquid or solid. A bath sponge and the head on a glass of beer are examples of foams. In most foams, the volume of gas is large, with thin films of liquid or solid separating the regions of gas.

An important division of solid foams is into closed-cell foams and open-cell foams. In a closed-cell foam, the gas forms discrete pockets, each completely surrounded by the solid material. In an open-cell foam, the gas pockets connect with each other. A bath sponge is an example of an open-cell foam: water can easily flow through the entire structure, displacing the air. A camping mat is an example of a closed-cell foam: the gas pockets are sealed from each other, and so the mat cannot soak up water.

Foams are examples of dispersed media. In general, gas is present in large amount so it will be divided in gas bubbles of many different sizes (the material is polydisperse) separated by liquid regions which may form films, thinner and thinner when the liquid phase is drained out of the system films.  When the principal scale is small, i.e. for a very fine foam, this dispersed medium can be considered as a type of colloid.

The term foam may also refer to anything that is analogous to such a foam, such as quantum foam, polyurethane foam (foam rubber), XPS foam, Polystyrene, phenolic, or many other manufactured foams.

(Wikipedia, Foams, 5/21/2012)

***********************************

Copyright 2016 by Roger D. Corneliussen.
No part of this transmission is to be duplicated in any manner or forwarded by electronic mail without the express written permission of Roger D. Corneliussen

***********************************

Roger D. Corneliussen, Editor
Professor Emeritus
Materials Engineering
Drexel University, Philadelphia, PA
Editor
Maro Publications
327 Huffman Drive
Exton, PA 19341
Telephone: 610 363 1533
Email:
cornelrd@bee.net
Website: 
http://maropolymeronline.com/